How Deep Should A Refrigerator Cabinet Be? 4 Superb Facts About This Kitchen Appliance

How deep should a refrigerator cabinet be? It is important to know the depth of the cabinet so that you can find an appliance that will fit. We all know that refrigerators are important to the kitchen.

They help keep food cold and can even make food last longer. But how deep should a refrigerator cabinet be? Read this article until end to know more about it. In this blog we also have an article about summit under cabinet refrigerator that you might want to read about it.

How Deep Should A Refrigerator Cabinet Be

So, how deep should a refrigerator cabinet be? Here are the breakdown for it:

• Most kitchen countertops are around 24–25 inches deep, so you’ll need a counter-depth fridge with a comparable depth when shopping for one.
• Most counter-depth refrigerators are 30 to 36 inches wide and 66 to 72 inches tall, however certain refrigerators, such as undercounter and built-in models, fall outside of those dimensions.
• When backsplashes, handles, knobs, and other hardware are taken into account, there is a surprising amount of variety in counter-depth refrigerator sizes.
• As a result, exact measurements are required for determining the ideal counter-depth refrigerator size for your kitchen.

Consideration Before Choosing Refrigerator

Keep the following concerns in mind when selecting a refrigerator to meet the depth of cabinets and countertops:

• The depth of kitchen counters may vary somewhat. Base cabinets are normally 24 inches deep, however they are occasionally situated slightly front of the wall to accommodate backsplash treatments. In addition, certain ornamental treatments may need a countertop overhang of up to 2 inches. It is fairly unusual for a countertop’s front edge to extend up to 28 to 30 inches from the rear wall. The total depth might be less or higher if the cabinets or countertop is custom-made.
• Counter-depth refrigerators are seldom perfectly matched to the countertops. The entire depth, measured from the rear of the appliance to the front of the handles, is usually about 30 inches. However, the depth of the refrigerator box without the doors is typically about 24 to 25 inches, which corresponds to the depth of normal cabinets and counters. This implies that the refrigerator doors will protrude forward from the front lip of typical countertops. This is required because the doors need space to swing open on their hinges. But you also don’t want the refrigerator to protrude too much from the adjacent countertops.
• Refrigerator depth may be expressed in a variety of ways by appliance makers. Because some manufacturers measure the appliance depth to the edge of the box without the doors, some measure to the front of the door, and still others measure to the front of the door handles and hardware, these values may vary by up to 6 inches. Make sure you understand what dimensions the measurements are referring to. Ideally, you should be able to discover a variety of depth measures provided.
• Refrigerators may need a modest space between the appliance’s back and the wall. As a result, the total installed depth of the appliance will be somewhat more than the actual measurements.
• Built-in backsplashes have the potential to minimize the total depth of the countertop. For example, if a cement-board backer and thick ceramic tile are used as a backsplash between the countertop and the bottom of the wall cabinets, the overall depth of the countertop may be reduced by up to 1 inch. If the wall behind the refrigerator has not been finished in this manner, you must account for this extra depth when selecting your refrigerator.

Dimensional Interpretation

Most countertop-depth refrigerators will have numerous depth measures that you may interpret whichever you see appropriate. One KitchenAid counter-depth side by side refrigerator (model KSBP25IN, for example) displays three distinct depth measurements:

• Nothing except the box measures 24 inches. There are no doors or knobs. There is no suggested 1-inch area behind the fridge to accommodate cooling operations, a power connection, or ice maker hose input.
• 27 1/2-inch box with doors, plus a 1-inch gap at the rear.
• 30 1/8 inch box with doors, plus approximately a 1-inch gap on the rear and about 2 5/8 inch for handles

In a kitchen with standard 24-inch-deep base cabinets and worktops with a 1-inch overhang, the doors on this refrigerator should extend over the front of the countertops by at least 2 1/2 inches, allowing the doors to open easily.

Our Latest Post:

💻 Wine Cooler | Waffle Makers  |  Single Wall Oven

---