Are Kegerators Worth It? Super 4 Things That You Need Consider Before Buying This.

Kegerators

Do you have ever think, that if you having kegerators…

…are kegerators worth it to buy and have? What is kegerator used for? If you’re not familiar with a kegerator, it’s a magical gadget that delivers liquid bliss, also known as a draft beer system. However, they aren’t only for beer; they may also be used to dispense any carbonated beverage. Because of their flexibility, kegerators have become a home bar staple, serving everything from cold brew coffee to kombucha. But are kegerators really worth the investment?  In here we have list for best kegerators that you might want to see!

Price For Kegerators

A good quality keg will cost anywhere from $200-$500 and should last around 5 years before needing replacement parts or even an entire new unit. If your looking into getting this type of setup, make sure to get something with at least 1/2 barrel capacity so you won’t need to order extra kegs every time you want more drinks.

You’ll also need some sort of CO 2 tank which typically costs between $20-50 depending on size. This allows the keg to function properly when connected to a tap and provides gas pressure needed to keep everything running smoothly. A pump may come along with the keg but isn’t necessary if you plan on using gravity flow instead. You’ll likely find yourself ordering additional equipment like taps, valves, regulators, etc., though most of them are fairly inexpensive.

The final piece of the puzzle is a fridge to store all of the condiments, ice packs, and other items that go inside the kegerator itself. These usually run between $100 -$300 and vary by brand. The best part is that once you’re done setting up your kegerator, you shouldn’t ever have to touch anything again unless there’s a problem. So why not just use a regular refrigerator then?

Are Kegerators Worth It

Here are four things to consider before bringing a kegerator into your home:

Dimensions & Space

Rather of getting too technical about customer purchasing behavior, let’s keep it simple. We know you want a kegerator. But do you have room for one, and where will you place it?

Of course, a kegerator must be at least the size of a keg, so you’ll need around two to three square feet of floor area (more for a multi-keg system). Keep in mind that many kegerators have a draft tower on top that may raise the height to roughly four feet, so keep that in mind while looking for a position.

Assume you’ve discovered room in the garage, basement, or kitchen. Is it easily accessible? Nobody wants to be lugging a half-barrel keg upstairs or downstairs, or maneuvering it across tight corners.

Should You Buy or Do It Yourself?

After you’ve located a suitable location for your home draft system, you should explore your alternatives. The majority of your selections will be based on your budget and whether you want to buy a readymade kegerator or use a do-it-yourself conversion kit.

There are now a number of firms that specialize in kegerators for commercial draft systems and the home bar. Kegerators can be freestanding or put next to an existing bar or counter. They even come in walk-in cooler versions—a guy can dream, right?

Draft Maintenance and Balance

I was merely joking about a kegerator being like a dog. Are you prepared to make a commitment? Some artisan brewer worked much too hard on the beer in that keg for you to serve it as a frothy mess out of unclean beer lines at the improper pressure.

It is advised that draft beer lines be cleaned with a caustic cleaning solution every two weeks and cleansed with an acid to break up any “beer stone” that may form every three months.

A beer stone (calcium oxalate) is the same chemical composition that makes up the majority of kidney stones!

It is not difficult to clean and balance your draft system. However, if you want a freshly poured IPA without the effort, you might be better off heading to the local pub.

Kegs

We’re talking about kegerators, so kegs will undoubtedly be involved and kegs really need CO2 to keep the beer fresh. Considerations for the keg portion of your setup impact on each of the preceding sections:

• Size and space: Not only should you consider bringing the keg to your location, but you should also consider how many kegs the kegerator can carry, which will depend on the size and shape of the kegs.
• Buy or Make Keg?: Remember to consider what sort of keg couplers to purchase and install if you’re doing it yourself. Different kegs require different attachments to tap the deliciousness.
• Draft upkeep and balance: You don’t put in a pool and expect people to swim in it if you never clean it. No one will want to drink your beer if it doesn’t taste right.
• Bonus: To return to the puppy analogy, you must be a responsible kegerator owner. Remember, Kegs: You’re renting, not buying.

While a kegerator is the ultimate beer-at-home status symbol, it, like most good things, takes some planning and ongoing maintenance. By considering all of these factors, you’re helping to ensure that your kegerator will be used frequently and, ideally, will expose others to the delights of home draft.

---

Our Latest Post:

💻Kitchen Utensils Non Toxic |Huge Kitchen Utensils | Glass Top Stove

---